docs(req): dcy-008 kill-switch confirm-discovery + REQ-043~047 (Approved)

dcy-008(비상 정지/kill-switch) OQ-2(별도 테이블/store)·OQ-4(수동 해제
resume_kill_switch) 결정 → confirm-discovery(confirmed) → draft-req →
confirm-req(5개 Approved).

- REQ-043 (Interface): trex.pause.req → trex.control.req 제어 채널 + action dispatch (OQ-1)
- REQ-044 (Data): day-scoped killswitch_exclusion 테이블 + store + 005 마이그레이션 (OQ-2)
- REQ-045 (Interface): kill_switch 실행 — 범위별 holding 순차 sell() + idempotency + 이력 (NFR-1/2 흡수)
- REQ-046 (Interface): 당일 제외 masking + 다음 거래일 자동복귀 + resume_kill_switch (OQ-4, NFR-3 흡수)
- REQ-047 (Documentation): baseline 3문서 정합

OQ-3(pending_buy 롤백)은 REQ Deferred. srs index Next ID REQ-048, Register +5,
요약 갱신. dcy-008 생성된 REQ 참조 기록.

dcy-009(멀티 인스턴스 RabbitMQ, draft)는 별도 주제로 제외.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
This commit is contained in:
2026-06-07 11:29:31 +09:00
co-authored by Claude Opus 4.8
parent 6fda381f62
commit c912c08071
8 changed files with 638 additions and 45 deletions
@@ -0,0 +1,122 @@
# req-045: kill-switch 실행 — 범위별 holding 즉시 청산 + 이력 로깅
- Status: Approved
- Type: Interface
- Priority: High
- Owner: project maintainers
## Intent
운영자가 `trex.control.req` 에 `action: "kill_switch"` 를 발행하면 대상 범위(portfolio 단위 또는 전역)의 모든 `holding` 슬롯을 즉시 청산한다. 기존 `SlotService.sell()`(REQ-036)을 재사용해 순차 매도를 제출하고, 같은 발동에서 대상 범위를 당일 제외(REQ-044/046)로 표시한다. 자율 안전 매도(dcy-007)와 독립적으로 동작하며, 발동 이력을 로깅한다(dcy-008 FR-1/4/5/6, NFR-1/2).
## Requirement
- `action: "kill_switch"` payload: `{action, scope: "portfolio"|"global", portfolio_id?(scope=portfolio 시 필수), actor?}`.
- 발동 시 대상 범위의 모든 `holding` 슬롯에 `SlotService.sell(actor="kill-switch", reason="emergency_stop")` 을 순차 호출한다.
- scope=portfolio: 해당 `portfolio_id` 의 holding 슬롯만.
- scope=global: 당일 전체 holding 슬롯.
- 이미 `pending_sell` 인 슬롯은 중복 sell 하지 않는다(REQ-036 idempotency).
- 발동과 동시에 대상 범위를 당일 제외로 표시한다(REQ-044 store 의 `exclude(...)` 호출). masking 동작 자체는 REQ-046.
- 발동 이력(actor, 발동 시각, scope, portfolio_id, 처리 슬롯 수)을 데몬 로그에 1건 기록한다.
- 응답: `{status: "ok", scope, portfolio_id?, liquidated: <처리 슬롯 수>}`. scope=portfolio 인데 `portfolio_id` 누락 시 `{status: "error", reason: "portfolio_id_required"}`.
- kill-switch 실행은 자율 안전 매도 루프(dcy-007)와 상태/스레드를 공유하지 않으며 서로 영향을 주지 않는다.
## Acceptance Criteria
1. Given holding 슬롯 N개(전역), When `{action:"kill_switch", scope:"global"}` 처리, Then N개 모두 `holding→pending_sell`(actor=kill-switch, reason=emergency_stop) 전이되고 응답 `liquidated=N`.
2. Given portfolio `pf-A` 에 holding 2개 + `pf-B` 에 holding 1개, When `{action:"kill_switch", scope:"portfolio", portfolio_id:"pf-A"}`, Then `pf-A` 2개만 청산되고 `pf-B` 는 holding 유지.
3. Given 대상 중 이미 `pending_sell` 인 슬롯, When kill_switch 처리, Then 그 슬롯에 중복 sell 호출이 없다(REQ-036 idempotency, transition_log 중복 없음).
4. Given scope=portfolio 인데 `portfolio_id` 누락, When 처리, Then `{status:"error", reason:"portfolio_id_required"}`.
5. Given kill_switch 발동, When 처리 완료, Then 대상 범위가 REQ-044 store 에 당일 제외로 기록된다(`list_excluded(today)` 에 포함).
6. Given kill_switch 발동, When 로그를 확인, Then actor/발동 시각/scope/portfolio_id/처리 슬롯 수를 담은 이력 1건이 기록된다.
7. Given 자율 안전 매도 루프(dcy-007)가 동작 중, When kill_switch 가 발동, Then 두 경로가 독립적으로 동작하며(REQ-036 idempotency 로 충돌 없음) safety-sell 루프가 중단/오류 없이 유지된다.
8. Given holding N개, When kill_switch 처리, Then 전체 sell() 제출 완료까지 지연이 N×100ms + 5s 이내이다(순차, outbox 전송 제외; A-4 N<10 가정).
## Impacted Area
- Docs:
- `docs/runtime-flows.md` — kill-switch 발동 흐름(트리거→순차 sell()→당일 제외 표시) (REQ-047 처리)
- `docs/interface-contract.md` — kill_switch payload/응답 계약 (REQ-047 처리)
- Modules:
- `trex_core/application/messaging_handlers.py` — kill_switch handler(REQ-043 dispatch 하위)
- `trex_core/domain/slot/service.py` 또는 신규 application 서비스 — 범위별 holding 조회 + 순차 sell() 진입점
- REQ-044 store 연동(당일 제외 표시)
- Tests:
- kill_switch handler 단위 테스트(전역/portfolio/idempotency/portfolio_id 누락/이력 로깅/독립성)
## Notes
- NFR-1(지연)·NFR-2(dcy-007 독립)는 본 REQ AC-8/AC-7 로 흡수(별도 REQ 미승격 — 독립 backlog 가치 낮음, dcy-008 정합).
- pending_buy 슬롯 처리는 dcy-008 OQ-3 Deferred → 기본 구현은 HOLDING 만 대상. pending_buy 롤백은 후속(REQ 추가 또는 change-req).
- R-1(큐 부하): sell()은 PENDING_SELL 전이(DB write 1회)로 빠름. execution worker 순차 처리 유지.
- R-3(브로커 오류): sell()→PENDING_SELL 성공 시 기존 outbox retry 가 eventual consistency 보장.
## Change Log
### CHG-20260607-01
- Date: 2026-06-07
- Author: Justin Ko
#### Change Summary
- dcy-008(confirmed) → REQ-045 초안 생성.
#### Intent
- kill-switch 즉시 청산(FR-1/4/5/6)과 NFR-1/2 흡수를 Interface REQ 로 정규화.
#### Acceptance Criteria Delta
- Added: AC-1~8 전체
#### Impacted Area Delta
- Docs: runtime-flows.md, interface-contract.md (REQ-047)
- Modules: messaging_handlers.py, service.py(또는 신규 서비스), REQ-044 store 연동
- Tests: kill_switch handler 단위
#### Delivery Trace Delta
- Batches: none (미할당)
- Releases: none
#### Revalidation Impact
- Reverification Needed: no
- Existing Implementation Invalidated: no
- Status Recommendation: keep-current
- Follow-up Action: confirm-req 로 승인.
### CHG-20260607-02
- Date: 2026-06-07
- Author: Justin Ko
#### Change Summary
- Proposed → Approved (confirm-req).
#### Intent
- 승인 게이트 통과: 필수 필드·구체 AC(1~8)·Impacted Area·Change Log 완비. dcy-008(confirmed) 범위와 모순 없음. NFR-1/2 흡수, OQ-3(pending_buy) REQ Deferred 는 비핵심 후속으로 승인 blocker 아님(기본 구현 HOLDING 한정).
#### Acceptance Criteria Delta
- (변경 없음)
#### Impacted Area Delta
- (변경 없음)
#### Delivery Trace Delta
- Batches: none (미할당)
- Releases: none
#### Revalidation Impact
- Reverification Needed: no
- Existing Implementation Invalidated: no
- Status Recommendation: keep-current
- Follow-up Action: suggest-batch-reqs / draft-batch 로 delivery 편성.